The Porsche 918 Spyder recall due to a failure in the belts

Porsche 918 Spydersometimes the best supercars are also affected by calls to review. This will be the case of all Porsche 918 Spyder which have been sold in the united States. Apparently, these vehicles could have problems in seat belts that could cause damage in the event of an accident. Specifically, it is a few screws that could have been installed incorrectly.

The brand of Stuttgart states that it has been due to a error in the parts catalog original 918 Spyder. There was displayed the wrong way the screw that goes in the frame the seat belt in the position of the reel of the belt and vice versa. This has caused some technical installed upside down without realizing it and being able to compromise the security of the supercar.

Porsche 918 Spyder revisiónIn the united States has been called all of the Porsche 918 Spyder to see if they have this problem and to give solution. Although it may seem like something simple, not so much, because it’s not worth just changing the screws in place. These screws are for single use only and therefore the mark should be replaced by new ones. By the time this issue has not caused any kind of damage on their owners.

Still do not know the exact number of vehicles affected. Not if the problem will affect only to the united States or whether it might also have happened in other countries. It is recognised that the Porsche 918 Spyder is not having very good luck, as this is their fourth call to review. Previously some units had problems with the control arms of the rear axle, some defective parts in the chassis and a piece of carbon fiber that could damage the wiring.

Source – Porsche

.